The Ax5-Series are low-cost infrared cameras. They are ideal tools for putting thermal imaging at work in an automation or machine vision environment. All models are extremely compact and can easily integrate in a machine vision environment.


FLIR Ax5 Series

FLIR Ax5 Series

FLIR A65

  • IR resolution: 640 x 512 pixels
  • Spatial resolution (IFOV): 45° (H) x 37° (V) with 13 mm lens 25° (H) x 20° (V) with 19mm lens
  • Image frequency: 7.5 Hz / 30Hz
  • Object temperature range: -25°C to +135°C (-13 to 275°F)
  • Thermal sensitivity/NETD: < 0.05°C @ +30°C (+86°F) / 50 mK
  • Accuracy: Accuracy ±5°C (±9°F) or ±5% of reading
  • Ethernet type:   Gigabit Ethernet
  • Operating temperature range: 15°C to +50°C (+5°F to +122°F)

FLIR Ax5 Series

FLIR Ax5 Series

FLIR A35

  • IR resolution: 320 x 256 pixels
  • Spatial resolution (IFOV): 48° (H) x 39° (V) with 9 mm lens 25° (H) x 19° (V) with 19 mm lens
  • Image frequency: 60 Hz
  • Object temperature range: -25°C to +135°C (-13 to 275°F) / –40°C to +550°C (-40 to 1022°F)
  • Thermal sensitivity/NETD: < 0.05°C @ +30°C (+86°F) / 50 mK
  • Accuracy:  ±5°C (±9°F) or ±5% of reading
  • Ethernet type:   Gigabit Ethernet
  • Operating temperature range: 15°C to +50°C (+5°F to +122°F)

 


Choice of image quality

The FLIR A65 produces crisp thermal images with 640 x 512 pixels. Users that do not need this high image quality for their application can opt for the FLIR A35, which produces thermal images of 320 x 256 pixels. The FLIR Ax5-Series makes temperature differences as small as 50 mk clearly visible.

GigE Vision™ standard compatibility

GigE Vision is a camera interface standard developed using the Gigabit Ethernet communication interface. GigE Vision is the first standard to allow for fast image transfer using low-cost standard cables, even over long distances. With GigE Vision, hardware and software from different vendors can operate seamlessly over Gigabit Ethernet connections.

GenICam™ protocol support

The goal of GenICam is to provide a generic programming interface for all types of cameras. Regardless of interface technology (Gigabit Ethernet, Camera Link, IEEE-1394 etc) or features implemented, the Application Programming Interface (API) will always be the same. The GenICam protocol also makes it possible to use third-party software with the camera.

14-bit temperature linear output

Allows you to do temperature measurements, in a non-contact mode, within any third-party software. A built-in Gigabit Ethernet connection allows real time 14-bit image streaming to computer.

Synchronization

Makes it possible to configure one camera to be "master" and others to be "slave(s)" for applications that call for more than one camera to cover the object or for stereoscopic applications.